Wi-Fi setting on Iphone 3G

Discussion in 'BSNL broadband' started by shyamdangi, Jul 6, 2010.

  1. shyamdangi

    shyamdangi New Member

    Hello,

    I recently got Iphone 3G and trying to configure Wi-Fi on it. I have BSNL type 2 modem and I have configured it. I am using USB modem to connect to my PC. Now when I try to connect Iphone to UTSTAR network I am not able to open any page in Safari. Iphone is detecting the UTSTAR network.
    I am using static IP for Modem and static IP for Iphone as well.
    Pls help me if someone has already configured it.

    Thanks,
    Shyam
  2. meetdilip

    meetdilip The Wizard

    1. Configure the modem in PPPoE mode.

    2. Enable DHCP in the modem.

    3. In TCP/IP properties of the modem, set " Obtain IP address automatically "

    Please mention modem - model and make

    How do you connect ? USB modem or router ? Do you mean you use USB modem for connection and router for sharing the connection wirelessly ?
  3. shyamdangi

    shyamdangi New Member

    Hello,

    Thanks for the reply.
    I am using USB modem which connects to my PC as PC is in different room and telephone line is in different room which connects to Wi-Fi WA3002G4 type 2 modem.

    Now I want to connect Iphone to Wi-Fi network. Earlier I had 2G Iphone and I was able to connect to Wi-Fi using Static IP on both PC and Iphone. However now I don't remember exacty what IP to use for Iphone and my PC(network card)

    When I used to connect to Wi-Fi using Iphone I was connecting type 2 modem directly to PC instead of using USB modem. Thats how I am trying now as well.

    Let me know what are your comments/suggetions.
    :rolleyes:
  4. meetdilip

    meetdilip The Wizard

    Did you tried these ? Also still to mention modem - model and make
  5. essbebe

    essbebe LEARNER

    Clarify.
    Whether you are taking a cable from WA3002-G4 USB port and connecting to USB port of Desktop .
    'Using USB modem" : mention type model/make etc. Are you using a wifi ISP ?
    different to No 2 below ?.
    2
    Did you follow suggestions above.?
    If you are on "Dialer" mode change to PPP/PPPoE and uncheck "bridged" in WAn page of modem/router.
    Enable DHCP
    enable UPnP if seen
    Have you used any security key for your wifi network ?
    Feedback.
    copy /paste this data ( no edit )
    Start RUN type cmd
    Ok
    New window
    type
    ipconfig /all
  6. shyamdangi

    shyamdangi New Member

    Hello ,

    1) I am able to connect from my Desktop(Using USB modem) to Type 2 modem(WA3002G4 type 2 modem--provided by BSNL). I am using PPoE and also DHCP is enabled on BSNL modem.
    2) Now when I keep the above set up as it is, I am able to see Wi-Fi icon on my Iphone (3G) However Safari browser is not able to open any web page or even You Tube is not opening.

    Pls help..
  7. shyamdangi

    shyamdangi New Member

    Could someone who has already implimented this will reply to this post.
    Dilip: Could u pls help me
  8. meetdilip

    meetdilip The Wizard

  9. essbebe

    essbebe LEARNER

    (a)
    Not clear. Presume you don't have an ethernet card in your desktop PC and using USB port ( of WA 3002-G4 to USB port of PC)
    If set up is same confirm.


    (b)
    Please see link below for this unit.

    (c) In WA3002-g4 enable DHCP in lan page and give a range say 192.168.1.3 to 192.168.1.20
    (d) also enable UPnP
    (e) presume you are in "Always On" PPP/PPPoE mode
    ( userId and PW entered in modem WAn page )
    (f) Save reboot.

    Para two:
    (g)
    In computer desktops /laptops.
    Start network Show all connections.
    LAN WLAN
    properties
    New settings page LAN WLAN
    Select TCP/IP
    properties
    Obtain IP address automatically.
    DNS same as before or google/opendns
    8.8.8.8 and 208.67.220 220
    APPLY SAVE.
    (h)Feedback , if still iPhone does not connect in wifi mode.
    Procedure;
    START RUn type cmd Ok
    new window
    type ipconfig /all
    (i) blank
    (j) feedback . item wise please (a) (b) etc
    copy/paste data here.
  10. hemanthgp

    hemanthgp New Member

    Any solution ?

    Hi SHyam

    did u get any solution for the problem you are facing ?
  11. shyamdangi

    shyamdangi New Member

    essbebe : Thanks for your reply. I am having ethernet card in my PC.
    I configured PPoE as per your wrote in your mail. But the also I am not able to open any website through Safari nor I am able to open Youtube.

    After Diagnostics I am getting following resulet:
    Test the connection to your local network Test your ENET(1-4) Connection: FAIL
    Test your Wireless Connection: PASS


    Test the connection to your DSL service provider Test ADSL Synchronization: PASS
    Test ATM OAM F5 segment ping: PASS
    Test ATM OAM F5 end-to-end ping: PASS


    Test the connection to your Internet service provider Test PPP server connection: FAIL
    Test authentication with ISP: PASS
    Test the assigned IP address: FAIL
    Ping default gateway: FAIL
    Ping primary Domain Name Server: PASS

    --------------------------
    But I am able to connect from my PC USING DIALER...NOT ABLE TO CONNCT W/O DIALER
  12. essbebe

    essbebe LEARNER

    @shyamdangi

    reply item wise (a) example: there is no USB modem. now not connected/ connected to LAn1 of Wa3002-g4
    not working/ internet Ok and can surf. .etc.
  13. shyamdangi

    shyamdangi New Member

    essbebe - Was not able to reply you last week. Pls find my reply in red font. Guess its in format as per you expected

    (a)
    Quote:
    I am using USB modem to connect to my PC.

    Not clear. Presume you don't have an ethernet card in your desktop PC and using USB port ( of WA 3002-G4 to USB port of PC)
    If set up is same confirm.
    I have a LAN, however I connect to WA 3002-G4 (Type2) from my PC using USB modem as PC is at bit distance from Telephone line where WA 3002-G4 is kept.

    (b)
    Quote:
    telephone line is in different room which connects to Wi-Fi WA3002G4 type 2 modem

    Please see link below for this unit.

    (c) In WA3002-g4 enable DHCP in lan page and give a range say 192.168.1.3 to 192.168.1.20 ----- Done
    (d) also enable UPnP ---- I am not able to find it on WAN setting page
    (e) presume you are in "Always On" PPP/PPPoE mode ---- Yes( userId and PW entered in modem WAn page )
    (f) Save reboot. ---Done

    Para two:
    (g)
    In computer desktops /laptops.
    Start network Show all connections.
    LAN WLAN
    properties
    New settings page LAN WLAN
    Select TCP/IP
    properties
    Obtain IP address automatically.
    DNS same as before or google/opendns
    8.8.8.8 and 208.67.220 220
    APPLY SAVE. ---- Done
    (h)Feedback , if still iPhone does not connect in wifi mode.
    Procedure;
    START RUn type cmd Ok
    new window
    type ipconfig /all
    (i) blank

    See below the result of ipconfig/all

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : comp
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No



    Ethernet adapter Local Area Connection 2:

    Media State . . . . . . . . . . . : Media disconnected
    Description . . . . . . . . . . . : Realtek RTL8168/8111 PCI-E Gigabit
    thernet NIC #2
    Physical Address. . . . . . . . . : 00-1C-C0-3F-3D-2B

    Ethernet adapter Wireless Network Connection 2:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : 54M USB Wireless Adapter
    Physical Address. . . . . . . . . : 00-1D-0F-B8-E9-0E
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.10
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 8.8.8.8
    208.67.220.220


    After this also I am not able to open any web page using Iphone. It connects to my Wi fi but no webpage is opened.
    Pls suggest
  14. essbebe

    essbebe LEARNER

    1.
    PC using USB modem
    Not clear. give details of the USB modem. ( make/model/number )
    Is there a connection from USB PORT of WA 3002-g4 to USB port of Computer ?
    2.
    After this also I am not able to open any web page using Iphone
    confirm your laptop in wifi mode can access Internet with wa3002-G4
    Are you using any security key ?
  15. shyamdangi

    shyamdangi New Member

    1.
    I am using PRONET wireless USB adapter which is connected to my PC's USB port and make connectivity to WA 3002-g4.No connection from USB PORT of WA 3002-g4 to USB port of Computer.2.
    confirm your laptop in wifi mode can access Internet with wa3002-G4 - I don't have laptop..Are you using any security key ? Security key ...
    Network Authentication is Open and WEP Encryption enabled with 128 bit
  16. essbebe

    essbebe LEARNER

    Your pronet USB WIFI modem . Mention model number.
    Do you need this to work Internet with your desktop computer ?

    2. WA3002-G4: see link below and check all settings are correct.
    USE a Rj45 from lan 1 and connect to ethernet port of PC and confirm
    internet is working.

    3. How many PC desktops you use ?
    Last edited: Jul 21, 2010
  17. shyamdangi

    shyamdangi New Member

    Your pronet USB WIFI modem . Mention model number. -- Model Number - PN-54 WUSB(54 MBPS)Do you need this to work Internet with your desktop computer ? Right because as mentioned earlier my PC is bit far from my WA3002-G4 modem so I am not using LAN card to connect to WA3002-G4
    2. WA3002-G4: see link below and check all settings are correct.
    USE a Rj45 from lan 1 and connect to ethernet port of PC and confirm
    internet is working. -- Yes. When I connect WA3002 - G4 directly to LAN, then also internet is working fine.

    3. How many PC desktops you use ? -- I am using only 1 PC desktop
  18. vatzcar

    vatzcar New Member

    it looks like you're using USB wifi adapter. so if you're being able to access internet from your PC, your wifi network is good. what you need to config. your iphone properly.
  19. essbebe

    essbebe LEARNER

    Yes. When I connect WA3002 - G4 directly to LAN, then also internet is working fine.
    Now see the link ( guide link given below)
    2.
    No1 Chennai web site and do the settings.
    Enable dhcp.
    Connect in "Always ON" mode ( userID/PW entered in wan page)
    check in IPhone the name of the network you had given appears.
    May need security code.
    3
    I am using only 1 PC desktop
    If this has a wlan card ( PCI card) WIFI operation can be confirmed. see 4 below.
    4.
    Pronet Model Number - PN-54 WUSB(54 MBPS)
    wait checking up .....
    PN-54WUSB
    54MBPS Wireless USB Adaptor Download (.zip format) - 13.9Mb
    http://www.pronetnetworks.com/drivers.html
    If this is used in the Desktop your wifi will work in computer.
    First upload the drivers to say C:/Pronet USB drivers.
    Restart system after inserting USB modem
    Let Windows detect new Hardware ( Your OS?)
    follow procedure.
    the WIFI icon should appear in Taskbar as well as in Network connections.
  20. shyamdangi

    shyamdangi New Member

    essbebe and all other members..thanks for all your help but I finally found the solution in the below site. It provides all the details for connecting to Iphone using Wi-fi

    cazisoft.com/2008/how-to-connect-the-iphone-to-the-internet]How to connect the iPhone to the Internet?

    :D

Share This Page