siemens c2110 modem configuration

Discussion in 'BSNL broadband' started by aps, Feb 23, 2008.

  1. aps

    aps New Member

    I cannot log onto the configuration page of C2110 Siemens Dataone modem usin g http://192.168.1.1 inspite of configuring IP address and subnet mask of the system.
  2. superprash2003

    superprash2003 New Member

    go to the command prompt and type ipconfig and post results.. and also type ping 192.168.1.1 and post results!!
  3. whitestar_999

    whitestar_999 Platinum Member

    if all else fails reset the modem using the reset button on modem.
  4. aps

    aps New Member

    Thanks.. I reset the modem and still cannot open the page in browser Opera or Mozilla Firefox. The modem is pinging at 192.168.1.1
    Last edited: Feb 24, 2008
  5. just4kix

    just4kix Guardian Angel Staff Member

    Did you hold the RESET button for at least 20 seconds or so (while it was powered ON)? If not, it will not reset.

    p/s. This is a safety feature of the RESET switch so that the modem is not aaccidently reset.
  6. aps

    aps New Member

    Thanks to all who promptly responded with solutions... I am now surfing through broadband.
  7. sayan86

    sayan86 New Member

    port forwarding problem..

    When i am going to port forwarding option in my nokia-seimens c2110 i am not being able to configure it,as the other option is preset & there is no scope to change it.how do i change it?is it bcoz of using dsl modem?ud adsl modem solve it?
  8. essbebe

    essbebe LEARNER

  9. superprash2003

    superprash2003 New Member

    do you use a dialer to connect to the internet?

Share This Page