Problem with ut300r2u Modem

Discussion in 'BSNL broadband' started by ja88, Jan 3, 2013.

  1. ja88

    ja88 New Member

    i have a problem with my ut300r2u modem.

    When i switch it on the PC/USB light is not stable it keeps blinking. I have to keep switching on/off the modem to make it stable.

    Any idea what is causing this and how it can be solved?
  2. ramitzar

    ramitzar New Member

    You should check whether the LAN is showing connected on your PC.Try pinging your modem IP : 192.168.1.1 & check what result it gives.You may try connecting with a different PC or change the LAN cable to see whether the issue persists.If it remains try resetting it to factory defaults (remember you need to reconfigure it after resetting to get it into its working state).If all these fails then you might have to change the modem due to a possible modem hardware issue.

Share This Page