how to connect internet in mobile via wifi

Discussion in 'BSNL broadband' started by 1802093, Jun 6, 2010.

  1. 1802093

    1802093 New Member

    i hv purchased anew samsung s5620 mobile. it is having wifi facility. i want to connect it with my bsnl broadband via wifi but it is being connected. i have entered my computer ip address and other relevent information from my computer through ipconfig.

    my computer ip address is 117.205.155.189
    and i have entered as phone ip as 117.205.155.194

    it connected bt when i want open any site it gives the message as service unavailable.
    please help me to get it connected

    //Moderator note:
    Welcome to India Broadband Forum.

    You have not activated your account and hence your posts are going into moderation queue. Please click on the link in the mail you received from the forum admin in your mailbox. Failure to do so will cause all your posts go into moderation.
    - just4kix
  2. essbebe

    essbebe LEARNER

    1.In the modem/router/WIFi enable DHCP
    (usually seen in LAN menu page) and give a range of
    say192.168.1.2 to 192.168.1.20
    2.
    Enable UPnP also.
    The IP address you have given will go on changing for BSNL.
    3.
    see links below for your modem/router.
    4. The wifi name you had entered in Wireless page of router should appear
    in your Phone.
  3. owaisahmed99

    owaisahmed99 New Member

    please help ! ! !

    sir . . . i hv little technical kno how of broadband. . . . i m tryn 2 connect my nokia n97 mini to broadband ( modem WA3002G4 ) via wifi . d phone detects the network but the web pages dont open . i tried typing 192.168.1.1 in internet explorer but it says the page doesnt exist . i use wifi 2 use internet through laptop where it works fine .. . help . . .

    //Sincere request: If it is not too difficult, please do not use SMS like language/words (e.g., wen, wid, etc.) in knowledge forums. Fun threads may be (but not necessarily) excused.

    Please read Forum Etiquette.

    Thank you.

    - just4kix
    Last edited by a moderator: Jun 8, 2010
  4. essbebe

    essbebe LEARNER

    In your laptop
    Start RUN type cmd
    OK
    new window opens
    type ipconfig /all
    copy/paste data here without editing.
    See post No 2. also.

    2. type in browser
    http://whatismyipaddress.com/
    then retype it say 117.xx.xx.xx
    A new window will open to access your router.
    Use default ID admin and PW admin

    If router menu appears
    Check settings as given in link WA3002-G4 below.
    Enable DHCP ( usually in LAN page)
    give range 192.168.1.2 to 192.168.1.10
    Better go to Management and Save /Backup current settings
    to say C:/My Documents/ wa3002 g4 wifi working.

Share This Page