D-Link DSL-2520U MTNL Configuration

Discussion in 'MTNL broadband' started by clarkpoon, Jan 18, 2012.

  1. clarkpoon

    clarkpoon New Member


    I need configuration for D-Link DSL-2520U router.

  2. essbebe

    essbebe LEARNER

    check my signature lin wa 3002_g4 quick reference guide in BSNl forum.
    Model same as Beetel 220BXI etc.
    or check this link. VPi VCI for MTNL 0 and 32.

    Which model you are using now ?
    If using multiple computers in lan mode
    enable DHCP in ( Lan menu page ) give range to
    Last edited by a moderator: Jul 7, 2013
  3. clarkpoon

    clarkpoon New Member

    Thanks essbebe, checking and will report you.

    edit - Is this link?

    www . indiabroadband . net / bsnl-broadband/ 8585-most-easiest-config-ever-wa3002g4-bsnl-modem . html

    or will you plz provide link.

  4. essbebe

    essbebe LEARNER

  5. clarkpoon

    clarkpoon New Member

    Which model you are using now ?

    LAN, Single PC.

    one more thing after configuring with bundled CD it change routers default password (admin:admin). I tried my login id/pass of ISP but won't work. any solution for it too.

  6. essbebe

    essbebe LEARNER

    MY Query:
    Your reply
    Earlier You had not set dlink DSL2520U and wanted instructions for setting it up. .
    You were Online and posting in this forum.
    wanted to know which model Of modem you were using.
    Can you connect to the internet and surf the web sites
    NOW with Dlink DSL 2520U?
  7. clarkpoon

    clarkpoon New Member

    I was using my old modem XAVI 8821r+.

    Ethernet or USB or something else? if yes then Ethernet.

    Yes Now its working f9.

    Plz tell me about it too.

    Thanks for your help :)
  8. essbebe

    essbebe LEARNER

    Confirm screen shot is similar. Beyond repair ?
    step by step instructions : For MTNL>vpi/vci 0 and 32

    [color="RED"][B] IF IT WORKS  DON'T REPAIR[/color] [/B] 
    Option 1 :
    if confident of making the settings again in DSL2520U use the RESET switch with power on for 10 seconds to 20 seconds to RESTORE factory settings.

    Option 2:
    Try ID admin PW password.
    ID support PW support or password.

    Option 3:
    IF Xavi 8821r+ can be used try to reconnect it and use again
    . Then Option 2.


    Attached Files:

    Last edited: Jan 19, 2012
  9. clarkpoon

    clarkpoon New Member

    Hello essbebe,

    Watch dis video, my d-link dsl 2520u is not accepting my default login id/password and disconnecting net frequently.

    plz help me...
  10. essbebe

    essbebe LEARNER

  11. clarkpoon

    clarkpoon New Member

    where to find tr_069 client in modem?
  12. essbebe

    essbebe LEARNER

    How you access the modem settings now ?
    How do you connect ?
    Using Dialer ( "bridged" in modem ( ID/PW entered externally ) or
    in PPPoE mode( In modem ) ID/PW stored in modem ?
  13. clarkpoon

    clarkpoon New Member

    After resetting i can access modem settings for 1-2 days only.

    I'm connecting using PPPoE, yes iD/pw stored in modem.
  14. essbebe

    essbebe LEARNER

  15. clarkpoon

    clarkpoon New Member

    here is my ipconfig /all file...

    can't attach file due to size exceed.

    i haven't found this option in my modem WAN setting page.
    Last edited: Jan 24, 2012
  16. essbebe

    essbebe LEARNER

  17. clarkpoon

    clarkpoon New Member

    Got this...how much time should i write here?
  18. essbebe

    essbebe LEARNER

    usually one day.
    Try 7 days viz 168 hours. confirm in ipconfig /all lease time changes.
  19. clarkpoon

    clarkpoon New Member

    What it will do after 7 days? again default id/pass will not work or wht?

  20. essbebe

    essbebe LEARNER

    May be your misery is postponed for one week !
    Check under Management TR_069 client : disable button.

Share This Page