BEETEL 110TC1 ADSL2+ Router not connecting in BRIDGE MODE

Discussion in 'BSNL broadband' started by geetacomputers_sdp, Jul 30, 2011.

  1. geetacomputers_sdp

    geetacomputers_sdp New Member

    Hello

    I have purchased a BEETEL 110TC1 ADSL2+ Router. The router gets connected in PPPOE>PPPOA mode. But I want to use BRIDGE MODE. I tried t change to bridge mode in router ie 192.168.1.1. But I am getting ERROR CODE 678 while connecting from PC. And also can any body help me to share the internet connection over network using BEETEL 110TC1 ADSL2+ Router and a 8 port switch.......
  2. essbebe

    essbebe LEARNER

    if you want to use a switch better to have PPPoE connection.
    By resetting the modem you will get default 1483 Bridging mode for all PVC's
    [​IMG]


    you are not entering userid/pw properly in "Dialer' page.
    8 way switch:
    Enable DHCP in the modem >give a range say 192.168.1.2 to 192.168.1.20

    in all computers network settings:
    Obtain IP address automatically.

    check signature link beetel450 TCI below.

    Attached Files:

  3. geetacomputers_sdp

    geetacomputers_sdp New Member

    Thanks for the reply dude.....Does in Network changing the IP Address settings to ->obtain IP address Automatically affects the File and Printer Sharing and Shared Drives???? I am entering the correct Username and Password... can you please explain in detail to get bridge mode from PPPOE in Beetel 110tc1???
  4. essbebe

    essbebe LEARNER

    question :I am entering the correct Username and Password... can you please explain in detail to get bridge mode from PPPOE in Beetel 110tc1???
    Answer:
    wait
    see this link. Screen shots from my working Beetel 110TCI.

    In first screen select " Bridging" last box. no other changes.


    There is confusion about PPPoE and "bridged " :\"Dialer" etc
    When you say "bridged" (1483 bridging option in this model)\
    you cannot normally enter userid/PW in the modem page.
    You use a separate Dialer window in computer
    and enter id/pw to connect.
    PPPoE . system connects automatically to internet.

    Obtain Ip adddress automatically will not afffect other systems, connected in the LAN.

Share This Page