192.168.1.1

Discussion in 'BSNL broadband' started by sathyamganesh, Feb 5, 2011.

  1. sathyamganesh

    sathyamganesh New Member

    When i type 192.168.1.1 in internet explorer, config page does not display. "page cannot display" error is coming. But in other browsers like chrome, firefox etc. Page displays well and i could configure modem.

    Problem is with IE only. Why????
  2. arpit60

    arpit60 New Member

    any proxy settings you might be using in IE ?
    if yes do not use proxy.
  3. anucs_in

    anucs_in New Member

    1.Reset the internet explorer.or use google chrome
    2.Restart the machine
    3.Restart the modem
    3.Ping 192.168.1.1
    ..then try to connect...
  4. essbebe

    essbebe LEARNER

  5. sathyamganesh

    sathyamganesh New Member

    MY I E version IS 8. WHEN I PING 192.168.1.1 IN CMD IT PINGS POSITIVELY.
    AS ADVISED BY YOU, I CHECKED THE ABOVE SITE AND FOUND THAT I HAVE DYNAMIC IP ADDRESS.
    I AM RAISING THIS ISSUE JUST TO GET TO KNOW THE TECHNICALITIES IF ANY AND TO KNOW IF ANY SETTINGS TO BE CHANGED IN IE. OTHERWISE I HAVE NO PROBLEM IN CONFIGURING MY MODEM THROUGH
    CHROME or FIREFOX.

    ANYWAY THANKS FOR YOUR KIND REPLY.
  6. essbebe

    essbebe LEARNER

    Please avoid full post capital letters.
    Did you get a screen like this when you typed your IP ( In IE8)
    (Dynamic address, which will change every time you connect /disconnect)
    [​IMG]

    2. Also copy/paste ipconfig /all
  7. sathyamganesh

    sathyamganesh New Member

    My IP Config is attached. Kindly reply.

    I am getting the authentication screen in chrome & Firefox but not in IE 8

    Attached Files:

    Last edited: Feb 6, 2011
  8. essbebe

    essbebe LEARNER

    Last edited: Feb 7, 2011
  9. sathyamganesh

    sathyamganesh New Member

    Many thanks to essbebe !

    Your suggestion 2 solved the problem fully.
    May be corrupted reg. entry. :)
  10. essbebe

    essbebe LEARNER

    Thanks for the feedback
    and an interesting problem.
    REP+++ (20 points ) check your USERCP.

Share This Page